Marder

Electricity, Air, and Plastic Recycling

Daniel Morton — Tue, 17 Jun 2025 21:15:48 +0000

Electricity, Air, and Plastic Recycling Daniel Morton Tue, 06/17/2025 - 15:15

Daniel Morton

This collaboration between four RASEI Fellows shows how electricity can be used to impart ‘superoxide powers’ to oxygen gas molecules from air, enabling the efficient recycling of PET plastics.

In 2012, 32.5 million tons of plastic waste was produced globally. 4.5 million tons of which was poly(ethylene terephthalate), better known as PET. You likely know this as the plastic that has the number 1 in the middle of the recycling symbol. PET is used extensively in materials such as packaging, textiles, films, and flexible electronics. By far and away its main use is in bottled drinks. PET is considered a standout material, it is strong, chemically resistant, transparent, and impermeable to water. Even better, it is possible to recycle PET – it has its own number, right? Unfortunately, this is not quite the full story. Globally, it is estimated that only about 9% of plastic waste is recycled, and while PET waste is one of the best performers, with a recycling rate approaching between 25-30%, the majority of plastic, even PET, ultimately ends up in landfills, incinerated, or worse, polluting our environment. The magnitude of this problem is only increasing; in 2024 the world generated an estimated 240 million tons of plastic waste, representing more than eight-fold increase in 12 years and highlighting the need for more effective solutions.

This teams bring together four RASEI Fellows, Oana Luca (Chemistry, �鶹ԭ��), Seth Marder (Chemistry and Chemical & Biological Engineering, �鶹ԭ��), Stephen Barlow (RASEI, �鶹ԭ��) and Elisa Miller (Chemistry and Nanoscience, NREL) to address the accelerating issue of plastic waste. While there are many parts to this global challenge, this research focuses on how we recycle plastics, specifically PET. When we think about recycling plastic, most of us just think about throwing a plastic bottle, or piece of packaging, into a recycling bin. We rarely give it much thought after that. This really is just the start of a journey that is more complex than many realize. There are actually several different approaches to giving plastic a second life. The most common, and perhaps the method that most people are familiar with, is mechanical recycling.

Think of mechanical recycling like an industrial washing machine combined with a paper shredder. Plastic items are collected, sorted, cleaned, and then chopped up into small flakes or melted down into pellets that can be molded into new products. This approach is efficient and works great for clean, single-type plastics, but there are some significant limitations with this process. In the same way that a white shirt can’t be perfectly restored after being mixed with brightly colored laundry, plastic quality degrades each time it goes through mechanical recycling. This reduction in quality is stark, most mechanically recycled plastics can only go through the process 2-3 times before they become unusable. This makes it financially unattractive and severely limits the long-term efficacy of recycling. How can this be an enduring solution if we can only recycle something a couple of times?

Chemical recycling takes a very different route, instead of the ‘brute-force’ approach of just melting and reshaping the plastic, it employs a more surgical method, breaking down the plastic polymer chains into their constituent molecular building blocks. These molecular building blocks can then be used, either to make new plastics, or for other applications. Because the new plastics are made with molecular control, there is no degradation in quality, and the materials can be recycled over and over, essentially as many times as you wish. Instead of a washing machine combined with a paper shredder, this is more like a LEGO set, where the model can be taken apart brick by brick and be used to build something entirely new. This research describes a new approach to depolymerization, a class of chemical recycling.

The research described in this RASEI collaboration, just published in ACS Sustainable Chemistry and Engineering, offers a new, more efficient approach. By passing an electric charge through the reaction, electrons can be used to activate molecules that can then go on to react with the polymer. In a recent study, that used additive molecules as electron shuttles, the team observed the addition of electrons to oxygen gas molecules in small amounts present in the reaction, that were originally thought to be innocent bystanders in the mixture. This led the team to hypothesize that oxygen gas molecules, directly from air, could be chemically reduced, (that is that they take on an extra electron), leading to the formation of a relatively stable superoxide radical anion, O₂^·–. This activated superoxide now acts in place of the solvent and reacts directly with the polymer. Since the superoxide has an extra electron gained from the electric current, the negatively charged superoxide molecule reacts with the centers that have a positive charge on the polymer. This results in the breaking down of the polymer in a predictable and selective fashion, and the incorporation of oxygen into the building blocks instead of the solvent molecules, leading to the reliable and reproducible formation of the same molecules that were used to build the polymer in the first place. The LEGO bricks are formed cleanly and are ready to be used again, with no degradation in molecular quality. This work demonstrates this technology on a range of different plastics using air, arguably one of the most abundant and cheap reagents, as the primary oxygen source, and all done at room temperature and pressure, a huge improvement on other chemical recycling approaches. While the results are promising and show good efficiencies, this lab-based proof of principle still has a number of challenges to solve before it can be scaled up to meaningful levels.

Today, most plastics are recycled using mechanical recycling, which is like the combination of an industrial washing machine and a paper shredder, producing low-quality products and reducing the possibility of future recycling, leading many to explore chemical recycling as an alternative to gain access to more valuable chemical building blocks. Current mainstream chemical recycling methods are like using a sledgehammer, they typically require high temperatures and lots of energy to break the chemical bonds. The development of electrochemical methods offers a more controlled approach, breaking down plastics at the molecular level and reliably producing build blocks that can be used over and over again. New recycling technologies could transform how we handle plastic waste, opening the door to recycling previously un-recyclable plastics, doing it in a more energy efficient way, producing higher quality recycled plastics, and making recycling economically competitive with virgin plastic production from oil. The development of more effective and general recycling strategies isn’t just an environmental imperative. As plastic waste continues to accumulate, it is rapidly becoming an economic necessity. We already have so much plastic in the world, if we can develop methods to regenerate and reuse the building blocks from plastic waste it will turn landfills into gold mines.

How amazing would it be if instead of society wasting plastics, filling landfills, and polluting our environments, we viewed used plastics as a commodity for future applications?

June 2025

Off

Traditional

White

2025 Right Here, Right Now Global Summit

Daniel Morton — Fri, 13 Jun 2025 22:52:54 +0000

2025 Right Here, Right Now Global Summit Daniel Morton Fri, 06/13/2025 - 16:52

Daniel Morton

Show me more!

2022 RHRN Summit

2025 RHRN Summit

2025 �鶹ԭ�� Session

2025 �鶹ԭ�� Today Article

In December of 2022 �鶹ԭ�� was the host for inaugural Right Here, Right Now United Nations Human Rights Global Summit, the organization of which engaged a number of RASEI fellows.

In 2025, the second Right Here, Right Now Global Summit was hosted by the University of Oxford. To highlight the global nature of the challenges faced a 24 hour global plenary session was undertaken. The cornerstone of the summit, this hybrid global event brought together leading thinkers and practitioners at the intersection of climate change and human rights. This session was broadcast live across all timezones. Co-created by Universities across the world, the plenary followed the sun as the baton was passed between different regions.

�鶹ԭ�� hosted a live session starting on June 5, 2025 at 9 AM MT. The session featured a keynote address from Sheila Watt-Cloutier and a panel discussion on pollution, water insecurity and human migration with �鶹ԭ�� students John Edem Ecklu, Naia Zulueta, and �鶹ԭ�� Associate Professor Amanda Carrico. Introductory remarks were made by Tonni Brodber and the sessions were moderated by NPR’s Lakshmi Singh.

The panel discussion brought together a range of perspectives and brought the audience into the discussion. The keynote highlighted the long-term commitment of Watt-Cloutier to appealing to the human side of climate change and the importance of how this impacts not only her community but everyone. Watt-Cloutier stated that she believes that one of the most important things we can be doing is educating people about the human impacts of climate change, that this can be an effective way to bring people together, even in times of political uncertainty and conflict.

Daniel Morton — Wed, 12 Feb 2025 23:49:33 +0000

SPECS 2025 Annual Meeting Daniel Morton Wed, 02/12/2025 - 16:49

Daniel Morton

SPECS EFRC

In February of 2025 RASEI hosted the 2025 SPECS Annual Meeting, bringing together researchers from across the nation to discuss recent updates and plan future research.

The Center for Soft PhotoElectroChemical Systems, or SPECS, is a US Department of Energy funded Energy Frontiers Research Center. The focus of SPECS is to understand and develop organic polymers, so called soft materials, that can be used in transporting electrons, for applications in batteries, electronics, solar energy harvesting, and thermoelectrics.